Sewage Pump, Cast Iron, 3" NPT Discharge, 2" Solids Handling
Our best, the SCC9 Series pump is a rugged, cast iron, submersible pump with a non-clog, two-vane semi-open impeller and solids handling capability to 2".
Key features
- 3/4 through 2 HP
- Class 30 cast iron construction
- SC9: 2" (50.8mm) NPT discharge
- SCC9: 3" (76.2mm) NPT discharge
- Dual Silicon Carbide mechanical seals with a secondary self-lubricating lip seal
- Availabel in manual operation (no switch) or with Piggyback style Tethered float
- Oil-filled motor with automatic reset overload provides safe operation
- Ball bearing construction for long life
- Easily replaceable power cord with optional lengths available
Specifications
BODY CONSTRUCTION: Cast iron
HORSEPOWER: Available in 1HP, 1-1/2HP, or 2 HP
MAXIMUM HEAD: 29' to 53' (model dependent)
MAXIMUM CAPACITY: 200 to 236 GPM (model dependent)
FLOW AT 10' LIFT: 160 to 234 GPM (model dependent)
MOTOR: 1725 RPM, PSC with thermal overload
SWITCH TYPE: Available in Manual (no switch) or Tethered float
MINIMUM SUMP DIAMETER:
MINIMUM SUMP DEPTH:
DISCHARGE SIZE: 3" NPT
MAXIMUM SOLIDS HANDLING SIZE: 2" sphericalcapability
IMPELLER: Cast iron
SHAFT SEAL: Primary: Mechanicaltype 21 or equal, Buna-N elastomers, silicon carbide seal faces, stainless steel metal parts; Secondary: self lubricating energized nitrile lip seal
BEARINGS: Ball type, oil lubricated
EXTERIOR HARDWARE: Stainless steel
AMP DRAW: 3 to 12 Amps (Model and Voltage Dependent)
POWER CORD: 20' UL/CSA Listed. 3-wire 16-3 SJTW-A/SJTW water resistant cord with integrally grounded three-prong plug.
VOLTAGE: Available in 230v, 208-230v, or 460v; 1- or 3-phase
MAXIMUM LIQUID TEMPERATURE: 130°F (55°C)
