Sta-Rite P43B0030A3-c Pentek Submersible Motor
PENTEK® XE Series submersible 4" high-thrust motors are built with the latest design, manufacturing and testing technology. They feature laser-welded 304L Stainless Steel construction, higher thrust capacities, and higher efficiencies. These motors incorporate "encapsulated, epoxy stator design," and professional grade Class F insulation provides longer life in harsh environments. Each motor is 100% factory pressure and run tested to support our quality standards.
Key Features:
- 3 Wire 7 Stages
- 3 Horsepower
- 3 Phase
- Volt - 230
- Length Inches - 30 5/8
Specifications:
NUMBER OF WIRES: 3 plus ground
HORSEPOWER: 3
VOLTAGE: 230v AC
PHASE: 3
FREQUENCY (Hz): 60
LOCKED ROTOR AMPS: 58.9
SERVICE FACTOR AMP RATING: 10.1
FULL LOAD AMP RATING: 9.2
END BELL: 304 Stainless Steel
SHELL: 304 Stainless Steel
MOTOR SHAFT: 17-4 Precipitation Hardened Stainless Steel
INSULATION: Class E, 311 degrees F (155 degrees C)
MAX. WATER TEMP.: 86 degrees F ((155 degrees C)
FASTENERS: 304 Stainless Steel
SAND BOOT: Nitrile
CABLE: 48", Field-Serviceable, Controlled Compression Design, UL and CSA Approved
DIAPHRAGM: EPDM
THRUST BEARINGS: Kingsbury-type, Pivot Shoe, Carbon Graphite Wear Rings
THRUST LOAD CAPACITY: 700 lbs
