Sta-Rite EC9200220M-01 Effluent Pump
The EC9 Series pump is a rugged, submersible cast iron pump with a non-clog, semi-open impeller and solids handling capability to 3/4".
Key Features:
- HP - 2
- Max Load Amps - 9.3
- Volts - 230
- Cycles - 1/60
- Cord Length - 20
- Switch Type - Manua
Specifications:
BODY CONSTRUCTION: Cast iron
HORSEPOWER: 2 HP
MAXIMUM HEAD: 85 FT (25.9 M)
MAXIMUM CAPACITY: 160 GPM (605 LPM)
FLOW AT 10' LIFT: 10' is Outside of Performance Curve
SWITCH: No switch, Manual operation
MOTOR: 3450 RPM, PSC with thermal overload
IMPELLER: Cast iron
SHAFT SEAL: Primary: mechanical type 6A or equal, Buna-N elastomers, silicon carbide sealing fades, stainless steel metal parts Secondary: self-lubricating lip seal
BEARINGS: Ball type, oil lubricated
EXTERIOR HARDWARE: Stainless steel
MINIMUM SUMP DIAMETER: 18" (457mm)
DISCHARGE SIZE: 2" (50.8mm) NPT
MAXIMUM OLIDS HANDLING SIZE: 3/4" spherical capability
AMP DRAW: 9.3 amps at full load
POWER CORD: 20' oil and water resistant 16-3 SJTW-A/SJTW with integrally grounded 3-prong plug. UL listed
VOLTAGE: 230 volts, 60 Hz, 1-phase
MAXIMUM LIQUID TEMPERATURE: 130°F (55°C)
