Sta-Rite EC7100220T-01 Effluent Pump
Our best, the EC7 Series pump is a rugged, submersible cast iron pump with a non-clog, semi-open impeller and solids handling capability to 3/4".
Key Features:
- HP - 1
- Max Load Amps - 6.6
- Volts - 230
- Cycles - 1/60
- Cord Length - 20
- Switch Type - Tethered
Specifications:
BODY CONSTRUCTION: Cast iron
HORSEPOWER: Available in 1/2 HP or 1 HP
MAXIMUM HEAD: 1/2 HP: 60 GPM / 1 HP: 72 GPM
MAXIMUM CAPACITY: 1/2 HP: 105 GPM / 1 HP: 100 GPM
FLOW AT 10' LIFT: 1/2 HP: Outside of Curve / 1 HP: 100 GPM
SWITCH: Available with No switch (Manual operation) or with Tethered Float
MOTOR: 1/2 HP or 1 HP PSC with thermal overload
IMPELLER: Cast iron
SHAFT SEAL: Type 6A orequal, Buna-N elastomers, silicon carbide sealing faces, stainless steel metal parts
BEARINGS: Ball type, oil lubricated
EXTERIOR HARDWARE: Stainless steel
MINIMUM SUMP DIAMETER: 18" (457mm)
DISCHARGE SIZE: 2" (50.8mm) NPT
MAXIMUM SOLIDS HANDLING SIZE: 3/4" spherical capability
AMP DRAW: 115v: 13.0 / 230v: 6.4 amps / 208v-230v: 6.0 amps / 460v: 3 amps (max load amps)
POWER CORD: 20' oil and water resistant 16-3 SJTW-A/SJTW with integrally grounded 3-prong plug. UL listed.
VOLTAGE: Available in 115v, 230v, 208v-230v, or 460v 60 Hz
MAXIMUM LIQUID TEMPERATURE: 130°F (55°C)
